The basic principles of the three elements of CNC lathe parts, dry goods, don't regret it!
by:Foxron
2021-09-26
u200b The basic principle of determining the three elements of CNC lathe parts: first determine the amount of back-cutting according to the cutting requirements, then look up the table to get the feed, and then look up the table to calculate the main cutting speed through the formula.u200b On many occasions, we can determine the value of these three elements through empirical data. Selection method Practice has proved that the selection of a reasonable cutting amount is related to various factors such as machine tools, cutting tools, workpieces and processes. The method of reasonable selection of processing amount is as follows: ① During roughing, higher production efficiency should be ensured, so larger back-cutting amount, larger feed amount, and medium or low cutting speed U should be selected. ②In the finishing process, the size and surface accuracy of the parts are mainly ensured, so choose a smaller back-cutting amount, a smaller feed amount, and a higher cutting speed. ③When roughing, it is generally necessary to give full play to the potential of the machine tool and the cutting ability of the tool. When semi-finishing and finishing in a CNC lathe factory, it should focus on how to ensure the quality of the processing, and on this basis, maximize the productivity. When selecting the cutting amount, the CNC lathe factory should ensure that the tool can complete a part or ensure that the durability of the tool is not less than one work shift, and less than half the working time of the work shift. The specific numerical value of the CNC lathe factory should be selected according to the specifications in the machine tool manual, tool durability and practical experience. The selection of the amount of back-grabbing: The selection of the amount of back-grabbing should be determined according to the rigidity of the machine tool, fixture and workpiece, and the power of the machine tool. If the process system permits, choose a larger amount of back-grabbing as much as possible. Except for the allowance left for later processes, the remaining rough machining allowance should be cut at one time as much as possible, so that the number of passes is small. Usually on a medium-power machine tool, the back-cutting amount for roughing is 8~10 mm (single side). The semi-finish machining of the CNC lathe factory is 0.5~5 mm; the precision machining is 0.2~1.5 mm. The determination of the feed rate: When the quality of the workpiece can be guaranteed, in order to improve the productivity, a higher feed rate can be selected. When CNC lathe factory cuts, turns deep holes or finish turning, it is advisable to choose a lower feed speed. The feed speed should be compatible with the spindle speed and the amount of back tool. When roughing, the selection of feed is limited by cutting force.
Custom message