loading

Focusing on precision metal parts manufacturing

            Email: sunny@foxron.cn

What should be paid attention to when using CNC lathe parts?

by:Foxron     2021-09-30
u200b With the rapid application of the machine tool industry to all walks of life, there are some things to pay attention to when using CNC lathe machining centers. The editor will introduce a few points here. The details are as follows: 1. CNC machining center requires location environment CNC machining center The location should be far away from the vibration source, direct sunlight and heat radiation should be avoided, and humidity and airflow should be avoided. If there is a vibration source near the CNC machine tool, an anti-vibration trench should be set around the machining center. Otherwise, it will directly affect the machining accuracy and stability of the CNC machine tool, and cause poor contact of electronic components, failures, and affect the reliability of the machining center. 2. Power requirements for CNC machining centers Generally, machining centers are installed in machining workshops, which not only have large environmental temperature changes and poor use conditions, but also a large number of electromechanical equipment, resulting in large fluctuations in the power grid. Therefore, the location where the machining center is installed requires strict control of the power supply voltage. The power supply voltage fluctuation must be within the allowable range and remain relatively stable. Otherwise, it will affect the normal operation of the CNC system of the machining center. Third, the requirements of the temperature conditions of the CNC machining center The ambient temperature of the CNC machining center is less than 30 degrees Celsius, and the relative temperature is less than 80%. Generally speaking, an exhaust fan or air cooler is arranged inside the numerical control electric control box to keep the electronic components, especially the central processing unit's working temperature constant or the temperature difference changes very small. Excessive temperature and humidity will reduce the life of control system components and cause more failures. The increase in temperature and humidity and the increase in dust will cause adhesion on the integrated circuit board and cause short circuits. 4. Use the CNC machining center according to the manual. When using the machining center, the user is not allowed to change the parameters set by the manufacturer in the control system at will. The setting of these machining center parameters is directly related to the dynamic characteristics of each part of the machining center. Only the value of the gap compensation parameter can be adjusted according to the actual situation.
Custom message
Chat Online
Chat Online
Leave Your Message inputting...