Interpretation of the content of machine tool operating regulations

The operating procedures of the machine tool, no matter what kind of machine tool we are operating, we need to know in advance, so that we can operate all kinds of machine tools correctly, so as to avoid unnecessary troubles caused by improper operations.

1. At work
(1) Operators should operate in accordance with the specified requirements. If they want to leave the machine tool, they should turn off the air source and power supply, and the machine tool should not be left unmanned.
(2) The machine tool cannot be used with overload or performance.
(3) Tools, workpieces, etc. should be clamped correctly, and the clamps should be firm, and no heavy hammers can be used.
(4) The transmission and feed mechanism should be checked for normal operation.
(5) Knives and abrasive tools should be kept sharp, and if they become dull or damaged, they should be replaced immediately.
(6) The safety protection device cannot be disassembled at will. If there is no such device, the machine tool cannot be used.
(7) No tools, workpieces or other sundries can be placed on the machine tool.
(8) The operation of the machine tool should be paid attention to at any time. If there is any abnormality, it should be stopped and checked immediately.
(9) The machine tool must be kept clean and clean.
2. After work
(1) Operating handles, switches, etc., must be in the correct position.
(2) After the machine tool stops running, cut off the air source and power supply.
(3) Clean the machine, clean the job site, and then perform maintenance work on the machine.
(4) Make a good job record and handover work.