Is computer gong processing important? If there is an error in the computer gong processing machine, what is the problem?

The price of ordinary milling machines is low, but the efficiency is low in mass production, the processing quality is greatly affected by the technical level of the operators, and the processing consistency is not good. Cnc processing has high efficiency in mass production, good processing consistency and stable quality. However, the cost of machine tools is expensive, and programming takes a lot of time when the number of processing is small, which is not economical. Repair personnel are required to have a higher level of hardness and strength of stainless steel, but its plasticity and toughness are good, and its thermal strength is high, and the chips are not easy to be cut off during cutting. On the premise of ensuring that the knife has sufficient strength, a larger rake angle should be selected, which can not only reduce the plastic deformation of the metal being cut, but also reduce the cutting force and cutting temperature, and at the same time reduce the depth of the hardened layer. CNC machining, also called CNC machining, refers to machining with CNC machining tools. Because CNC machining is programmed and controlled by a computer, CNC machining has the advantages of stable machining quality, high machining accuracy, high repeatability, complex surface machining, and high machining efficiency.

1. There is looseness between the servo motor and the lead screw.
2. The ball screw bearing or nut is worn.
3. Insufficient lubrication between screw and nut.
4. The servo motor is malfunctioning.
5. There is dirt inside the grating ruler.
6. The servo amplifier is malfunctioning.
To choose the right computer gong processing, log in: http://www.dghongye.com