Safety rules and technical requirements for large-scale machining

Large-scale machining is very important in the process of processing. Everyone needs to follow the relevant standards and requirements to ensure the accuracy of the processing, so that we can produce fittings with suitable size and shape, so that our work can be More continuous and normal progress will not cause too much impact and loss.

Large-scale machining technology is the use of corresponding processing methods to process mechanical parts, so that their shape, size and properties meet the corresponding standards, mainly including rough machining, finishing, assembly, inspection and packaging. As long as everyone ensures that each processing process is performed, the finished product can be more standardized and reasonable, and it meets the relevant standards. So in the process of processing, what large-scale machining technologies do you need to master?
1. Remove the oxide scale on the parts, and the appearance of the processed parts should not have defects such as scratches and abrasions.
2. When the assembly is too heavy, its shape, length, and temperature should meet the relevant standards, and the airtightness of the entire system, so as not to affect the assembly hydraulic system.
3. In the process of assembling, it can prevent the parts from bumping, scratching or rusting, which affects the large-scale machining process, which affects and damages the performance of the product, and makes our work unable to continue to work normally. Go down.
Safety rules for large-scale machining
1. Must comply with the safe operation regulations of the machining center.
2. Before work, you should wear protective equipment, tie up your cuffs, large-scale mechanical processing technology, and do not wear scarves, gloves, ties, aprons, and female workers' hair braids should be tied in their hats.　　
3. Check whether the tool compensation, machine zero point, workpiece zero point, etc. are correct before starting the machine.
4. The relative position of each button should meet the operating requirements. Carefully compile and enter the numerical control program.　　
5. It is necessary to check the operation status of the protection, insurance, signal, position, mechanical transmission part, electrical, hydraulic, digital display and other systems on the equipment. The large-scale machining process can be cut under all normal conditions.