Several shaft parts processing routes commonly used by Zhejiang shaft processing manufacturers

Shaft parts are a common type of parts. Its structure is a rotating body, and its length is generally greater than its diameter. It is widely used in various mechanical equipment to support transmission components, transmit torque and bear loads. Generally, the main processing surface of the shaft processing factory in Zhejiang is the outer surface and the common special-shaped surface. Therefore, it is necessary to select a more appropriate processing method according to various accuracy levels and surface roughness requirements.



　　 First, it is the processing route from rough turning to semi-finishing turning and then finishing turning. This is also the most important process route selected by Zhejiang shaft processing manufacturers for the outer circle processing of shaft parts of common materials; followed by From rough turning to semi-finishing turning, to rough grinding, and finally to the fine grinding processing route. For ferrous metal materials and precision requirements, the surface roughness requirements are small and the parts that need to be hardened, this processing route is also Zhejiang A common processing route for shaft processing manufacturers, because grinding is the most ideal follow-up process.

　　 The third route of Zhejiang shaft processing manufacturers is from rough turning to semi-finishing turning, then finishing turning and diamond turning. This kind of processing route is specially used to process non-ferrous metal materials, because non-ferrous metals have low hardness and are easy to block. The gap between the sand grains is usually not easy to obtain the required surface roughness by grinding, and the process of fine turning and diamond turning must be used;

　　 The last processing route is from rough turning to semi-finish turning, then rough grinding, fine grinding, and finally finishing. This route of Zhejiang shaft processing manufacturer has been hardened for ferrous metal materials, and the accuracy is Parts with higher requirements and lower surface roughness values u200bu200bare a processing route that is often used.