What are the issues to consider when programming computer gongs?

No matter what technology is used for processing, it has its own considerations. We need to consider these issues to make our processing better, so that there will be no problems and troubles. Computer gong processing The same is true, so what issues should be considered when programming computer gongs!

1. Carefully analyze the drawings and determine a reasonable process route.

2. The size of the tool should be selected, and the actual size measured should be filled into the tool card.

3. Determine a reasonable cutting amount. Mainly the spindle speed, the amount of back-cutting, the feed speed and so on.

4. There should be enough space for automatic tool change to avoid collision with workpiece or fixture. The tool change position is recommended to be set at the machine origin.

5. In order to facilitate the inspection and debugging of the program, the main program mainly completes the tool change and subroutine call. This procedure is simple and clear.

6. Check and test run the compiled program, pay attention to whether there is interference between the tool, fixture or workpiece. When checking the M, S, T functions, it can be done in the Z-axis locked state.

The above is the editor's introduction to what issues should be considered when programming computer gongs. For more knowledge and more details, please consult our computer gongs processing, or log in to our official website address. Understanding: Website address: http://www.dghongye.com/