What are the maintenance tasks that must be done on the scheming machine?

The walking machine can also be equipped with automatic feeding device, automatic processing, automatic feeding, realizing the fully automated production of a single machine tool, reducing labor costs and defective products in the production process, and can be used to produce large quantities of precision shaft parts, suitable for long Large-scale, multi-variety, and high-precision machining tasks for large-diameter 'slender shaft' parts and 'small' and 'abnormal-shaped' parts. This cycle will automatically alarm until the bar is processed, and the one-person multi-machine mode is truly realized, which greatly saves labor costs.

　　The standard configuration of the core machine is equipped with 4 power milling cutters, 5 outer circle cutters, 4 end face circular cutters, and one feeding process can be completed at the same time: turning outer circle, turning taper circle, turning ellipse, internal and external thread, electric The spindle realizes the stepless indexing function, which can be rotated to any angle to mill the plane you want to machine, milling plane, milling slot, spiral groove, cutting groove, side drilling, eccentric hole, tapping, lettering, knurling , Wait until the process. Save secondary milling, drilling and other secondary processing. Improved accuracy and processing efficiency. Save secondary processing equipment and labor. It breaks the monotonous function of traditional machine tools that can only be turned and can only be milled.

　　Walking machine is generally used to process small parts in bar materials, in large batches, and many of them are formed at one time. As long as it involves bar processing and the diameter (not more than 32) is not too large, the walking machine has a great advantage with the feeder (because the walking machine must be equipped with a feeder for processing), so it is a small independent The production line has advantages in terms of processing speed and labor cost.

The four daily maintenance of 　　 go scheming:

　　 1. If the diameter of the drill bit of the corer is larger, or the test-drilled holes are more skewed, the collet can use a chisel to chisel several grooves on the side with more holes.

　　2. The XYZ three-axis ball screws of the machine tool adopt the P3 double nut pre-tightened ball screw provided by Taiwan Shangyin. The bearings at both ends of the ball screw adopt the special paired centripetal thrust bearings imported from Japan for the P4 ball screw. All three axes are pre-stretched.

　　3. Use reliable and safe electrical components and professional circuit design to ensure the safe operation of the machine;

　　4. Mount it on the drill chuck with the multi-axis machine chuck and correct it to make the cone radially beat the fish within 0.02mm Correct the V-shaped cone and fix the V-shaped iron.

　　 Mechanical seals are mainly used for rotating seals of pumps, compressors, hydraulic drives and other similar equipment.

　　 Mechanical seal is a device that has at least a pair of end faces perpendicular to the rotating shaft under the effect of fluid pressure and the elastic force (or magnetic force) of the compensation mechanism. Compensate for the metal bellows bellows mechanical seal of the auxiliary seal ring.

　　 The rational use of various seals is very important for the accuracy and service life of the machine tool.