What is a mechanical processing plant and is its design and process benchmark the same?

Machining, although its name is very short, but it contains a lot of relevant knowledge, so it takes some time and energy to have a comprehensive and in-depth understanding of mechanical processing, so as to achieve the goal. At the same time, I also hope that everyone can take it seriously and carry out it so that you can gain some professional knowledge from it.


1. What is mechanical processing?
Machining, in the view of Wuxi Tiecheng, a mechanical processing plant, refers to the process of changing the shape or performance of a workpiece through a mechanical device. This process is called machining. Moreover, if machining is classified according to the difference in machining methods, it can be divided into cutting machining and pressure machining.


2. In mechanical processing, what are the design principles of the process design?
In mechanical processing, if the process specification is designed, there are some design principles, which are mainly: First, the designed process specification can make the parts or workpieces have good processing quality, and can achieve The technical requirements stipulated in the design drawings; second, the process should have a higher production and processing efficiency, and the finished product through processing can be used as quickly as possible; third, efforts should be made to reduce manufacturing costs; fourth, manual operations should be reduced Strength, and also allows processing to proceed safely.


3. Are the design benchmarks and process benchmarks in machining the same?
For this question, the mechanical processing plant Wuxi Tiecheng believes that the answer is no, that is, the design benchmark and process benchmark in mechanical processing are different. Design datum refers to the datum used to determine the positions of other points, lines and surfaces on the part drawing. The process reference refers to the reference used in the processing and assembly of the part, and it can be divided into assembly reference, measurement reference and positioning reference.


4. Is it important to calculate the cost of mechanical processing?
From a professional point of view, the answer to this question is yes, and the mechanical processing plant Wuxi Tiecheng also thinks so. Moreover, in addition to paying attention to the calculation of the cost of machining, it is also necessary to know how to calculate correctly so that accurate results and correct values u200bu200bcan be obtained, so as to avoid wrong results and get wrong values.