Latest products
What is the effect of water control in feed processing machinery?
by：Foxron
2021-11-04
In the working process of feed processing machinery, the staff not only need to pay close attention to the working conditions of the equipment, but also need to pay attention to the moisture content of the feed pellets. This is because the feed moisture target is often directly related to the uniformity of the quality level of the feed pellets, which will also affect the economic benefits of the production enterprise.
That is to say, in the process of operating feed processing machinery, on the one hand, we must pay attention to maintaining its normal work, on the other hand, we should also strengthen the technical level of water control. A moisture target is also one of the keys to ensure the quality and safety of feed products. If the water content is too much and exceeds the specified value, then the obtained feed pellets will simply be mildewed, and it will be difficult to add in storage, etc., and it will also cause the nutrient content of the feed pellets to be reduced, which reduces the energy of the feed.
On the other hand, if the moisture content is too low, it will affect the taste of feed pellets and reduce economic benefits. On the other hand, it will affect the working conditions of feed processing machinery, leading to increased wear, increasing production costs, and also Will reduce output value. Therefore, as far as production companies are concerned, how to control the moisture content of feed pellets at an appropriate level has obviously become a concern for many feed processing companies.
Analyze from the perspective of actual production, because the processing process and material origin of different feeds and the proportioning plan are different, so during the work of the feed processing machinery, the control of the central product and the final product moisture will often change. In general, it is reasonable to control the moisture change of the semi-product powder after mixing in the range of 9% to 14%.
In addition, when entering the conditioning process, the moisture content of the powder should generally be maintained at about 12.5%. Later, in the process of entering the feed processing machinery mold for restriction, it is generally required to control the smooth moisture content between 15.0% and 16.5%. In this way, more uniform feed pellets that meet the quality requirements can be obtained.
Huizhou Fishery Machinery Factory www.zgkljx.com
【Key Words】Feed Processing Machinery
That is to say, in the process of operating feed processing machinery, on the one hand, we must pay attention to maintaining its normal work, on the other hand, we should also strengthen the technical level of water control. A moisture target is also one of the keys to ensure the quality and safety of feed products. If the water content is too much and exceeds the specified value, then the obtained feed pellets will simply be mildewed, and it will be difficult to add in storage, etc., and it will also cause the nutrient content of the feed pellets to be reduced, which reduces the energy of the feed.
On the other hand, if the moisture content is too low, it will affect the taste of feed pellets and reduce economic benefits. On the other hand, it will affect the working conditions of feed processing machinery, leading to increased wear, increasing production costs, and also Will reduce output value. Therefore, as far as production companies are concerned, how to control the moisture content of feed pellets at an appropriate level has obviously become a concern for many feed processing companies.
Analyze from the perspective of actual production, because the processing process and material origin of different feeds and the proportioning plan are different, so during the work of the feed processing machinery, the control of the central product and the final product moisture will often change. In general, it is reasonable to control the moisture change of the semi-product powder after mixing in the range of 9% to 14%.
In addition, when entering the conditioning process, the moisture content of the powder should generally be maintained at about 12.5%. Later, in the process of entering the feed processing machinery mold for restriction, it is generally required to control the smooth moisture content between 15.0% and 16.5%. In this way, more uniform feed pellets that meet the quality requirements can be obtained.
Huizhou Fishery Machinery Factory www.zgkljx.com
【Key Words】Feed Processing Machinery
Custom message
Tel : 86 769 3325 6035 / 86 769 8306 2140
Fax : +86 769 85634781
E-mail : 
Wechat//whatsapp : +86 189 3818 5885
Address : Wentang Industrial Zone, East District, Dongguan, Guangdong 
Zip code : 523121
