Latest products
What should be paid attention to when processing precision hardware parts?
by：Foxron
2021-09-22
Matters needing attention when processing precision metal parts:
Precision Hardware Parts Processing Notes:
1. Before the machine works, check whether the moving part is filled with lubricating oil, then start and check whether the clutch and brake are normal, and run the machine idling for 1-3 minutes. Operation is strictly prohibited when the machine is faulty.
1. Check whether the moving part is filled with lubricant before the machine works, then start and check whether the clutch and brake are normal, and run the machine empty for 1-3 minutes. Operations are strictly prohibited when the machine is in trouble.
2. Maintain the correct posture at work and have sufficient energy to cope with the work. If you find that you are unwell, you should leave the job immediately and report to the leader. When operating, you must concentrate your thoughts, chat and cooperate with each other. The operator must not operate in a state of irritability and fatigue, so as to avoid accidents and ensure safe operation. Before entering the work position, all employees check whether their clothing meets the job requirements. Slippers, high heels and clothing that affect safety are not allowed, and those with long hair must wear a helmet.
2. Keep the correct posture while working, and have enough spirit to cope with the work. If you find that you are not well, you should leave the job immediately and report to the leader. When operating, we must concentrate our thoughts, strictly prohibit chatting and cooperate with each other. Operators should not operate in a state of irritability and fatigue, so as to avoid accidents and ensure the safety of operation. Before entering the job, all employees check whether their clothes meet the requirements of the job. Slippers, high heels and clothing that affect safety are not allowed to wear. Safety hats should be worn for long hair.
3. Turn off the power first when changing the mold, and then start to install and debug the mold after the press movement department stops running. After installation and adjustment, move the flywheel by hand for two test punches to check whether the upper and lower molds are symmetrical and reasonable, whether the screws are firm, and whether the blank holder is in a reasonable position.
3. When replacing the die, first turn off the power supply. After the movement Department of the punch stops running, the die can be installed and debugged. After installation and adjustment, the flywheel is tested twice by hand to check whether the upper and lower dies are symmetrical and reasonable, whether the screw is firm, and whether the blank holder ring is in a reasonable position.
4. You must wait for all other personnel to leave the working area of u200bu200bthe machine and remove the sundries on the workbench before turning on the power to start the machine.
4. The power-on mechanism can only be activated after all other personnel leave the mechanical workspace and take away the debris on the workbench.
5. When the machine is working, it is forbidden to reach into the working area of u200bu200bthe slide block, and it is strictly forbidden to pick and place the workpiece by hand. Tools that meet the standards must be used when picking and placing the workpiece in the die. If you find any abnormal sound or malfunction of the machine, you should immediately turn off the power switch for inspection. After the machine is started, one person transports materials and operates the machine. Others are not allowed to press the electric building or step on the foot switch board, let alone put their hands in the working area of u200bu200bthe machine or touch the moving parts of the machine with their hands.
5. When machinery is working, it is forbidden to put hand into the slider working area, and to take and place the workpiece by hand. Standard tools must be used when drawing and placing workpieces in the die. If abnormal sound or machine failure is found, the power switch should be switched off immediately for inspection. When the machine is started, one person will transport material and operate it mechanically. Others may not press the power or pedal on the switch board, let alone put their hands in the working area of u200bu200bthe machine or touch the moving part of the machine with their hands.
6. When leaving get off work, turn off the power supply, and arrange the finished products, side materials and sundries on the post to ensure a clean and safe working environment.
6. When leaving work, the idle power supply should be turned off and the finished products, materials and sundries on the post should be sorted out to ensure the clean and safe working environment.
Precision Hardware Parts Processing Notes:
1. Before the machine works, check whether the moving part is filled with lubricating oil, then start and check whether the clutch and brake are normal, and run the machine idling for 1-3 minutes. Operation is strictly prohibited when the machine is faulty.
1. Check whether the moving part is filled with lubricant before the machine works, then start and check whether the clutch and brake are normal, and run the machine empty for 1-3 minutes. Operations are strictly prohibited when the machine is in trouble.
2. Maintain the correct posture at work and have sufficient energy to cope with the work. If you find that you are unwell, you should leave the job immediately and report to the leader. When operating, you must concentrate your thoughts, chat and cooperate with each other. The operator must not operate in a state of irritability and fatigue, so as to avoid accidents and ensure safe operation. Before entering the work position, all employees check whether their clothing meets the job requirements. Slippers, high heels and clothing that affect safety are not allowed, and those with long hair must wear a helmet.
2. Keep the correct posture while working, and have enough spirit to cope with the work. If you find that you are not well, you should leave the job immediately and report to the leader. When operating, we must concentrate our thoughts, strictly prohibit chatting and cooperate with each other. Operators should not operate in a state of irritability and fatigue, so as to avoid accidents and ensure the safety of operation. Before entering the job, all employees check whether their clothes meet the requirements of the job. Slippers, high heels and clothing that affect safety are not allowed to wear. Safety hats should be worn for long hair.
3. Turn off the power first when changing the mold, and then start to install and debug the mold after the press movement department stops running. After installation and adjustment, move the flywheel by hand for two test punches to check whether the upper and lower molds are symmetrical and reasonable, whether the screws are firm, and whether the blank holder is in a reasonable position.
3. When replacing the die, first turn off the power supply. After the movement Department of the punch stops running, the die can be installed and debugged. After installation and adjustment, the flywheel is tested twice by hand to check whether the upper and lower dies are symmetrical and reasonable, whether the screw is firm, and whether the blank holder ring is in a reasonable position.
4. You must wait for all other personnel to leave the working area of u200bu200bthe machine and remove the sundries on the workbench before turning on the power to start the machine.
4. The power-on mechanism can only be activated after all other personnel leave the mechanical workspace and take away the debris on the workbench.
5. When the machine is working, it is forbidden to reach into the working area of u200bu200bthe slide block, and it is strictly forbidden to pick and place the workpiece by hand. Tools that meet the standards must be used when picking and placing the workpiece in the die. If you find any abnormal sound or malfunction of the machine, you should immediately turn off the power switch for inspection. After the machine is started, one person transports materials and operates the machine. Others are not allowed to press the electric building or step on the foot switch board, let alone put their hands in the working area of u200bu200bthe machine or touch the moving parts of the machine with their hands.
5. When machinery is working, it is forbidden to put hand into the slider working area, and to take and place the workpiece by hand. Standard tools must be used when drawing and placing workpieces in the die. If abnormal sound or machine failure is found, the power switch should be switched off immediately for inspection. When the machine is started, one person will transport material and operate it mechanically. Others may not press the power or pedal on the switch board, let alone put their hands in the working area of u200bu200bthe machine or touch the moving part of the machine with their hands.
6. When leaving get off work, turn off the power supply, and arrange the finished products, side materials and sundries on the post to ensure a clean and safe working environment.
6. When leaving work, the idle power supply should be turned off and the finished products, materials and sundries on the post should be sorted out to ensure the clean and safe working environment.
Custom message
Tel : 86 769 3325 6035 / 86 769 8306 2140
Fax : +86 769 85634781
E-mail : 
Wechat//whatsapp : +86 189 3818 5885
Address : Wentang Industrial Zone, East District, Dongguan, Guangdong 
Zip code : 523121
