What should I pay attention to when processing precision mechanical parts?

With the use of precision machining, there are more industrial applications. Because of this, many people will use it for processing. In order to achieve better results, what should be paid attention to when precision machining parts ? Let us find out below.

1. When aligning the workpiece:

Only use the hand to move the chuck or open the lowest speed for alignment, not high speed alignment.

2. When changing the rotation direction of the spindle:

It is necessary to stop the spindle first and then stop, and it is not allowed to change the direction of rotation suddenly.

3. When loading and unloading the chuck:

It is only allowed to turn the V-belt by hand to drive the spindle to rotate. It is absolutely forbidden to directly start the machine tool to force it to loosen or tighten. At the same time, planks should be placed on the bed surface to avoid accidents.

4. Tool device:

It is not advisable to extend too long, the gasket should be flat and the width should be different from the width of the bottom of the tool.

5. Hardware parts processing:

It is forbidden to use the reverse method to brake the spindle rotation.

6. Wheel Type Hexagonal Lathe:

(1) It is not allowed to process curved and rough bar materials.

(2) When loading the material, the material head must be aligned with the chuck hole, and the material should be driven in quietly.

7. Program-controlled transfer lathe:

According to the fine hardware parts processing technology request, stop the preselection of the related work step program spindle speed, tool post feed, tool post motion trajectory and continuous offside. Put the electric knob in the 'adjust' position to stop the test run. After confirming that there is no problem, put the electric knob in the automatic or semi-automatic position to stop working.

To learn more about Dongguan Hongye Precision Machinery Co., Ltd., please log on to our official website: Precision Machining: http://www.dghongye.com/