How to process aluminum alloy profiles

1. Cutting. The length of the aluminum profile is usually 6.01 meters, and it is necessary to finely cut the aluminum profile according to the attached drawings. Our general cutting error is less than 0.5mm. In addition to cutting length, bevel cutting and bevel cutting of aluminum profiles can also be performed.　　 2. Drilling and tapping. Generally, when connecting aluminum profiles internally, drilling and tapping must be performed. Different specifications of aluminum profiles are different from the drilling tools used for tapping. Therefore, punching and tapping are also one of the aspects to test the processing strength of aluminum profiles.　　 3. Aluminum profile assembly. After cutting, drilling and tapping, an aluminum profile connector is needed to connect the aluminum profile. As long as the installation supervisor performs the installation according to the drawings, he can manufacture the required aluminum frame, equipment cover, assembly line workbench, etc.