How to protect the engraving machine equipment?

1) Protect the tool setter from excessive oil erosion. 2) Pay attention to the control of flying debris. Flying debris is very harmful to the machine tool. Flying into the electric control cabinet will cause a short circuit. Flying into the guide rail will reduce the life of the lead screw and the guide rail. Therefore, the machine tool must be The main part of the seal is well sealed.　　3) When moving the lamp, do not pull the lamp cap, it is easy to damage the lamp cap.　　4) During the machining process, do not observe near the cutting area to avoid flying chips to injure your eyes. When the spindle motor is rotating, it is forbidden to perform any operations on the work surface.　　5) When opening and closing the door of the machine tool, do not open and close it sharply. During the finishing process, the shock and vibration during the door opening process will cause the machined surface to have knife marks.　　6) Give the spindle speed, and then start processing, otherwise, because the spindle starts to rotate slowly, it will start processing without reaching the desired speed, which will cause the motor to suffocate.　　7) It is forbidden to place any tools or workpieces on the beam of the machine tool.　　 8) It is strictly forbidden to place magnetic tools such as magnetic suction cups and dial indicator holders on the electric control cabinet, otherwise the display will be damaged.