Precautions for precision parts processing

Every work you carry out needs to pay attention to every matter, especially in the case of precision parts processing, so that good practical results can be obtained in the case of carrying out the work. So what should be paid attention to when machining precision parts? Let us understand together below:

　　1. Before the machine works, check whether a part of the movement is filled with lubricating oil, then start and check whether the clutch and brake system are all normal, and run the machine idling for 1-3 minutes. The actual operation is prohibited when the machine has common faults.

　　2. Maintain the correct posture at work and have sufficient mental substance to cope with the work. If you feel uncomfortable, you need to leave the post immediately and show it to the leading cadres. In the actual operation, the concept must be centralized, chatting is forbidden, and mutual cooperation is prohibited. Operators must not actually operate under the condition of upset and exhaustion to prevent safety accidents and ensure operational safety. All employees check whether their clothing meets the working standards before entering the post. It is forbidden to wear sandals, high-heeled shoes and clothing that endangers safety. Those with long hair must wear safety helmets.

　　3. When disassembling and changing the mold, first cut off the power, and after the high-speed punch motion unit stops running, you can just start to install and adjust the mold. After installation and adjustment, move the flywheel of the water pump to test for 2 times to check whether the left and right molds are symmetrical and effective, whether the screws are firm, and whether the edging ring is on an effective position.

　　4. Be sure to wait for all other personnel to leave the working area of u200bu200bthe machine and remove the sundries on the workbench before turning on the power to start the machine.

　　 5. When the machine is working, it is strictly forbidden to reach into the working area of u200bu200bthe slide block, and it is forbidden to pick and place the work piece by hand. Be sure to use special tools that meet the regulations when picking and placing the workpiece in the stamping die. If you find that the machine makes abnormal noise or the equipment is not working, you should immediately turn off the main power switch for inspection. After the machine is started, one person should understand the actual operation of the machine. Others should not press the power button or foot on the button switch board, let alone put their hands in the working area of u200bu200bthe machine or move part of the machine with their hands.

　　6. When you are off work, you should turn off the switch power supply, and sort out the finished products, scraps and sundries on the job to ensure the cleanup and safety of the office environment.

　　 The above explanations are the precautions for precision parts processing. I hope it will be helpful to you after reading it. If you want to know more about precision parts processing, please feel free to consult and we will be happy to provide you with Excellent service!