It's an exciting CES show
Remember the three major properties of this dental implant material
by：Foxron
2021-09-19
The ideal dental implant material should have the following properties:
1. Good biological properties: ① Tissue compatibility means that the material has a good affinity when it comes into contact with the body’s soft and hard tissues and body fluids after implantation.
② Biomechanical compatibility. When hard tissues and body fluids are in contact, the mechanical properties of the material (parameters such as elastic modulus) are similar to those of bone tissue, so as to avoid excessive formation of the interface with bone tissue when the implant is stressed. Stress concentration.
2. Good mechanical properties: Planting technology is based on the development of modern mechanical processing. Good processing performance can meet the needs of morphological design. Occlusion is the basic function of teeth. Implants can bear static and dynamic chewing occlusal forces, and will not break, deform, or wear during a long period of use.
3. Good processing and forming performance:
In clinical practice, a large number of standardized implants with uniform appearance and fine surface processing are used, and sometimes implant materials are individually made according to the individual anatomical characteristics to restore the defective hard tissues.
4. Good resistance to disinfection and sterilization:
Implants must be strictly disinfected and sterilized before implantation. Therefore, it is required that the planting materials used will not be denatured due to high pressure, high temperature, immersion and fumigation of various disinfection liquids and gases, ultraviolet rays and gamma ray irradiation, etc. , And will not stagnate the residual amount of disinfectant to ensure the safety and success of implant surgery.
1. Good biological properties: ① Tissue compatibility means that the material has a good affinity when it comes into contact with the body’s soft and hard tissues and body fluids after implantation.
② Biomechanical compatibility. When hard tissues and body fluids are in contact, the mechanical properties of the material (parameters such as elastic modulus) are similar to those of bone tissue, so as to avoid excessive formation of the interface with bone tissue when the implant is stressed. Stress concentration.
2. Good mechanical properties: Planting technology is based on the development of modern mechanical processing. Good processing performance can meet the needs of morphological design. Occlusion is the basic function of teeth. Implants can bear static and dynamic chewing occlusal forces, and will not break, deform, or wear during a long period of use.
3. Good processing and forming performance:
In clinical practice, a large number of standardized implants with uniform appearance and fine surface processing are used, and sometimes implant materials are individually made according to the individual anatomical characteristics to restore the defective hard tissues.
4. Good resistance to disinfection and sterilization:
Implants must be strictly disinfected and sterilized before implantation. Therefore, it is required that the planting materials used will not be denatured due to high pressure, high temperature, immersion and fumigation of various disinfection liquids and gases, ultraviolet rays and gamma ray irradiation, etc. , And will not stagnate the residual amount of disinfectant to ensure the safety and success of implant surgery.
Custom message
Related Products
Tel : 86 769 3325 6035 / 86 769 8306 2140
Fax : +86 769 85634781
E-mail : 
Wechat//whatsapp : +86 189 3818 5885
Address : Wentang Industrial Zone, East District, Dongguan, Guangdong 
Zip code : 523121
