Talking about the improvement effect of the process method of machining internal thread on CNC lathe

The above procedure is used in the field to process the threaded hole of the spline shaft on the CNC lathe, and the use effect is good, which can fully meet the process requirements. The main advantages of using this processing plan are as follows:
(1) After the improvement, there is no need to stop the line and wait, and the two turning processes can be carried out at the same time.
(2) Solve the problem of low efficiency caused by frequent tool replacement.
(3) The utilization rate of the online machine tool is improved, and an ordinary lathe can be used, and the machine tool will not be idle when processing this part, which can match the production line capacity and can be used for larger batch production.
In addition, for the processing of internal threads, in addition to the machining methods used above, you can also use the machining methods of turning threads, such as the single-stroke thread cutting command G32 in the G code command, the thread cutting multiple cycle command G76, Thread cutting cycle command G92, select a suitable thread turning tool for processing. However, turning internal threads has limitations on the diameter of internal threads, which are generally used in cases where the diameter of internal threads is large. We will not discuss them here. For more CNC lathe processing methods, please consult Fuyang Zhongrui Electronic Component Factory, and we will be happy to answer you!