The purpose of floor boring and milling machine and the description of operating procedures

Floor boring and milling machine, about this product, the website has not introduced it, so to us, it is still very unfamiliar, and we don't know it very well. But it doesn't matter, I believe that through the introduction of this article, everyone can know and understand the product, but will not be ignorant of it.

Floor boring and milling machine, it is a heavy-duty mechanical equipment, capable of boring, milling and other operations. In this kind of mechanical equipment, the worktable is fixed instead of moving, so it is suitable for processing workpieces with a large size and weight. Its boring shaft is installed in the milling shaft, so it can be telescopic and feed separately. The operating procedures of the floor boring and milling machine include: (1) The operator must have an operating license to operate the machine and equipment, and be familiar with all aspects of it, otherwise it cannot be operated. (2) Operators should wear labor protection equipment before working to ensure their own safety. (3) Before starting up. It is necessary to check whether the operating handles, switches, various mechanism systems, etc. are intact, whether they can work normally, and whether the safety devices are complete and reliable, and whether there are obstacles or debris in the sports area. (4) If loading and unloading heavy workpieces, the spreader and lifting method should be reasonably selected according to the shape and weight of the workpiece. (5) When the machine is running, it is strictly forbidden to touch the running parts with your hands to prevent danger. Once an abnormality occurs, it should be shut down immediately for inspection, processing and resolution. (6) It is strictly forbidden to use the machine with super performance and overload to avoid damage to the machine. (7) The cutting speed and feed rate should be selected reasonably, otherwise problems will occur and the machine will malfunction. (8) Tool replacement should be carried out in accordance with the specified requirements to avoid problems. (9) After the work is completed, the workbench should be retracted to the middle position, and then the main power supply and water and air valves should be turned off, the power supply should be cut off, the machine should be cleaned, the work site should be cleaned, and the workpiece should be placed in the designated position, and the work record should be filled in.